Tile Floor Bedroom Hotel Glazed Porcelain New Arrival 800x800 Polished Tiles 10MM Thickness Kitchen CLASSIC Modern Ceramic Tiles

1.Safer and Greener

Inkjet polished tiles have finer selection of raw materials and higher requirements, and continue the stable polishing tile production process for many years, and the products produced are safer and more environmentally friendly.

2.The specifications are more regular and the flatness is better Inheriting the advantages of stable production process, in the production process, the specifications are regular, especially the ink on the surface can penetrate into the body of the embryo, and it will not be affected during the surface polishing process, so the overall flatness is better than full-polishing products such as glaze. 3.Good hardness, more wear-resistant Inkjet polished tiles continue the natural properties of ordinary polished tiles, the Mohs hardness is about 6, the product is more wear-resistant, and it is suitable for more places. 4.Uniform color and uniform effect Due to the large color difference of natural stone due to diagenesis time and different depths of rock layers, inkjet polished tiles are carefully formulated with new inks. The color of the same batch of products is consistent, the color difference is more controllable, and the true color is vividly displayed, which truly gives it the aesthetic soul of natural stone. 5.Products are harder and more resistant to bending Due to the natural formation of natural stone, the maturity time and weathering are different, resulting in different degrees of compactness and strength; inkjet polished tiles are pressed by thousands of tons of hydraulic presses, and then sintered at high temperature above 1200 degrees Celsius, with high strength; good compactness and water absorption Low rate, good bending, cracking, and bending strength. 6.Easier to remove stains The inkjet polishing tile still uses a superfine powder cloth layer on the dense embryo body, and the super clean and bright technology is applied on the surface, so that the antifouling performance of the whole product is better and better.