rotary paddle level switch / sensor

Description
ILT-type Bin Level Indicators are designed for electric signalling by rotary action of minimum or maximum material level inside bins, hoppers or silos.

Function
As soon as the material level reaches the measuring paddle rotation is blocked. As soon as the material level sinks below the paddle radius, rotation restarts activating other system components. The top or side-mounted indicators are commonly used for powdery and granular materials.

Enclosure: IP 65
Process connection: Thread G1 1/4”, G1 1/2”, G2 1/2”
Material process connection: Plastic
Material vane shaft
and measuring vane: Stainless Steel
Friction clutch: Protection of the gearing from impact
of the measuring vane
Pickup delay: Approx. 1.3 sec
Sensitivity: Adjustable via reset force
of spring in three positions
Speed of measuring vane: 1 r.p.m.
Mains voltage: 115V / 230V, 50-80 Hz or
24V / 48V, 50-60 Hz or 24V DC
all voltages + 10% / -15%
Installed load: 3 VA (3 W)
Connection terminal: 1 x max. 1.5 mm2
Screwed cable gland: 1 x PG 13.5” (1 x blank-off
flange PG 13.5) plastic
Signal output: Floating microswitch
AC max. 250 V, 2 A, 500 W (Cos j=1)
DC max. 300 V, 2 A, 60 W
Connection diagram: AC version: on printed circuit
DC version: inside the lid
Protection class: I
Container excess pressure: max. 0.8 bar
Temperature inside vessel: -20 °C ~ 80 °C
Ambient temperature
inside casing: -20° C ~ 70 °C