- Product Details
- {{item.text}}
Quick Details
-
Brand Name:
-
PANDA
-
Model Number:
-
UV60
-
Type:
-
Primer
-
Appearance:
-
Fluorescent transparent liquid
-
MOQ:
-
10 barrel
-
Packing:
-
15L/barrel
-
Application:
-
Treat molded EVA without roughening
-
Pot life:
-
2hrs(After mixing hardener)
-
Delivery time:
-
10 Days
-
Shelf life:
-
6-12 Months
-
Characteristics:
-
Good initial bonding strength
-
Remark:
-
Add 5% hardener when use
Quick Details
-
CAS No.:
-
N/A
-
Other Names:
-
Shoe cleaner
-
Place of Origin:
-
China
-
Brand Name:
-
PANDA
-
Model Number:
-
UV60
-
Type:
-
Primer
-
Appearance:
-
Fluorescent transparent liquid
-
MOQ:
-
10 barrel
-
Packing:
-
15L/barrel
-
Application:
-
Treat molded EVA without roughening
-
Pot life:
-
2hrs(After mixing hardener)
-
Delivery time:
-
10 Days
-
Shelf life:
-
6-12 Months
-
Characteristics:
-
Good initial bonding strength
-
Remark:
-
Add 5% hardener when use
We are the supplier of various kinds of shoe making chemicals, please do not hesitate to contact us, if you have any inquiry.
Eva ultraviolet primer for plastic/rubber/EVA materials surface treating
| Product information | |
| Main Component | Synthetic resin |
| Shelf Life | 6-12 months |
| Appearance | Fluorescent transparent liquid |
| PH | 6-8 |
| Packaging | 15L/barrel or according to your advance request |
| Pot life |
2hrs (After mixing hardener) Add 5% hardener: Used within 2 hours for best bonding performance. |
| Other models | 01P 02P 04U 05U 03P 11L 21R 22R 23R/A 23R/B 25R/A 25R/B 31T 32T 33T 51E E UV60 15L 18L 90N 91W |
Eva primer for plastic/rubber/leather materials shoe surface treating agent
APPLICATIONS & CHARACTERISTICS
1. UV60E is a toluene-free cement for EVA injection process.
2. Good initial bonding strength. Applications
Precautions For Use:
1. Generally used for Eva sheets or soles, pre-treated with glue,
2. Wait until the treatment water is dry before applying the glue,
3. After being coated with treated water and heated at 65 degrees for 5 minutes, the effect is even better,
4. Eva material can not be polished before using the treated water, but must be irradiated by ultraviolet light.
OPERATION METHOD
1.Shoe materials → pre-treatment → uv60E+ 5%Hardener → Drying→ cement
2.Drying Condition: Traditional Oven : (55 ℃ ± 5 ℃) X 3’-5’
NIR : (55 ℃ ± 5 ℃) X 2’-4’
NIR+MIR oven condition:(50℃ ~ 65℃) X 90"~180"
PS:
Drying condition is suggested to set according to the operation of different materials, and special models.
Note: Recommended Hardener is RC.
1. NIR oven drying condition is suggested to set according to the operation of different models, and special models.
2. For special models with NIR oven, the operation needs to be adjusted according to factories’ condition
(e.g. oven,
Layout…).
When the drying condition is continuous two sections:
Recommended the first section Low-temperature drying (35-45℃x3’-4’) and the second section drying (50-60℃x3’-4’)
The thickness of the adhesive on the materials should be enough and even to make sure its adhesion effect.
3. Before factories adjust the drying condition based on the different types of NIR+MIR ovens, must make
sure the bonding
test is passed. For adhesive's film-forming ability, when adjust the drying condition, time-no less than 90",temperature- no
higher than 65℃.
4. For special shoe types or porous material such as mesh, factories can adjust the NIR+MIR oven time (if necessary, prolong
it)and temperature depending on actual inner trial test for bonding and drying with FTY
CEs. By no means should the
temperature be higher than 65℃.
