20w 7mm gum stick special hot glue gun accessories toys multi-purpose multifunctional professional hot-melt guns

Weight: around 141g
Size: 25*15*4cm
Item: hot glue gun round insert
Hot glue gun flat plug
Rubber stick 7-190mm white

41*40*65cm/96pcs/15kgs

Instructions:
First, performance characteristics
1, this product uses high tech ceramic PTC thermistor as the most heating element, and the heating speed is fast. PTC thermistor automatically keeps constant temperature. When the temperature rises to the design temperature of rubber gun, it will not rise again. It can prevent the damage of rubber gun caused by overheating of heating body, save energy consumption and prolong service life. 2. The electrical insulation strength of this product does not break down when 3750V/min is turned on. It can be used normally in AC or DC power supply between 110V and 240V. It is not limited by voltage fluctuation. It has built-in safety fuse and is safer to use.
Two, product application
1, toy model
2, artificial flowers, Christmas tree.
3, ornaments, metal products.
4, wood products, cardboard and so on.
5, electronic circuit board.
Three, use method
1. this series of products can be applied to the diameter of 7-7.5 mm rubber strip.
2. Insert the adhesive tape from the tail of the rubber gun and send it to the gun tube. After 5-8 minutes of preheating with the power supply, the melt can be extruded by pulling the trigger, and the amount of glue can be controlled.
3. In the process of using, if one rubber rod is not used at a time, the rubber rod is not taken out, and the power supply can be inserted for preheating for 5-8 minutes before using directly.
Four. Matters needing attention
1. use voltage 100-240V, frequency 50-60HZ.
2. This product is a high temperature rubber gun. The rubber tape of the corresponding specifications should be selected according to the product series. If the user uses the rubber tape of different sizes or types, it may lead to the melt reflux and damage the rubber gun.
3. The nozzle of the melting gun and the melting viscose temperature are higher at work, so the human body should not touch them. It is forbidden to use them in flammable and explosive occasions.
4. When the rubber gun is working, it should not raise the rubber gun and the gun tip should not be upward. If the rubber gun is not glued for 15 minutes, please cut off the power supply to avoid the rubber gun being damaged by the backward melting of the rubber strip.
5. Due to the durable material installed in the rubber gun, smoke may appear in the first use. After 30 minutes, the smoke will be eliminated automatically.
6. keep the gun slider clean regularly to ensure that the rubber strip can be sent smoothly into the barrel.
7. it is forbidden to pull glue strip from the end of the rubber gun.
8. When rubber guns are not used, they should be placed in a ventilated and dry place. It is forbidden to put them in a humid or watery place. It is forbidden to put them where children or children can get them.
9. this tool must be placed on its support when it is not used.