Stainless steel mixing tank Liquid mixer mixing heating storage mixing tank thickened homogeneous emulsion tank

120L Vacuum emulsion tank

1) 120L emulsifying tank: full jacketed structure, steam heated, atmospheric pressure vessel.
2) Feed quantity: 35-120L.
3) Wall scraping and mixing without screw structure.
4) Upper homogenizer, the 5th generation micron level homogenizer.
5) Platform hanging ear fixed.
6) Mixing power 0.75KW Mixing speed 0-60r/min, homogenizing emulsification power 4KW speed 0-3500r/min. (The demander provides its own inverter and control system.)
7) Tank structure form: the upper and lower part of the tank is a three-layer structure, which is divided into the upper head, the tank body and the lower head. The upper head is connected with the tank body flange, and the barrel body is connected with the lower head.
8) The tank body has four layers inside and outside structure, which is divided into inner liner layer, sandwich heating and cooling layer, insulation layer and outer layer. It can be heated by running water or steam. The thermal insulation layer is insulated by aluminum silicate process. When heating, the temperature of the outer surface of the tank is less than 40℃.
9) Tank inner liner, upper and lower head material is: SUS304, thickness is: 6mm, jacket material is: SUS304, thickness is 4mm, outer sheath material is SUS304, thickness is 2mm.

300L Vacuum emulsion tank

1) 300L emulsifying tank: full jacketed structure, steam heated, atmospheric pressure vessel.
2) Feeding quantity: 100-300L.
3) Wall scraping and mixing without screw structure.
4) Upper homogenizer, the 5th generation micron level homogenizer.
5) Platform hanging ear fixed.
6) Stirring power 1.5KW stirring speed 0-60r/min, homogeneous emulsification power 5.5KW speed 0-3500r/min. (The demander provides its own inverter and control system.)
7) Tank structure form: the upper and lower part of the tank is a three-layer structure, which is divided into the upper head, the tank body and the lower head. The upper head is connected with the tank body flange, and the barrel body is connected with the lower head.
8) The tank body has four layers inside and outside structure, which is divided into inner liner layer, sandwich heating and cooling layer, insulation layer and outer layer. It can be heated by running water or steam. The thermal insulation layer is insulated by aluminum silicate process. When heating, the temperature of the outer surface of the tank is less than 40℃.
9) Tank inner liner, upper and lower head material is: SUS304, thickness is: 6mm, jacket material is: SUS304, thickness is 4mm, outer sheath material is SUS304, thickness is 2mm. The inner liner is hygienic mirror polishing 300MESH (hygienic), all the welding ports in contact with the material are polished, 8μm, all the concave and convex parts on the internal and external surfaces of the equipment are used for arc transition, or the chamfered transition is not less than 135 degrees, to ensure that there is no dead Angle easy to clean.

1500L Vacuum emulsion tank

1) 1500L emulsion tank: full jacketed structure, steam heated, atmospheric pressure vessel.
2) Feed quantity: 550-1500L.
3) Upper homogenizer, the 5th generation micron level homogenizer.
4) Platform hanging ear fixed.
5) Homogeneous emulsification power 18.5KW speed 0-3500r/min. (The demander provides its own inverter and control system.)
6) Tank structure form: the upper and lower part of the tank is a three-layer structure, which is divided into the upper head, the tank body and the lower head. The upper head is connected to the tank body, and the tank body is connected to the lower head.
7) Tank inside and outside four layers of structure, divided into inner layer, sandwich heating and cooling layer, insulation layer, outer skin. It can be heated by running water or steam. The thermal insulation layer is insulated by aluminum silicate process. When heating, the temperature of the outer surface of the tank is less than 40℃.
8) Tank inner liner, upper and lower head material: SUS304, thickness: 10mm, jacket material: SUS304, thickness: 5mm, outer sheath material: SUS304, thickness: 2mm. The inner liner is hygienic mirror polishing 300MESH (hygienic), all the welding ports in contact with the material are polished, 8μm, all the concave and convex parts on the internal and external surfaces of the equipment use arc transition m), or use not less than 135 degrees chamfering transition, to ensure that there is no dead Angle easy to clean.
9) Tank cover with: Φ50 feed port, Φ38 purified water interface, 500mm diameter manhole 1 with cover can be sealed, Φ38 spare port, Φ25 compressed air inlet, Φ38 vacuum break port, Φ38 vacuum port. Integrated viewing mirror with light (DN80mm glass lens with tempered glass, brushed viewing mirror), pressure gauge, cleaning ball.

1500L vacuum emulsifying mixing tank

1) 1500L emulsion tank: full jacketed structure, steam heated, atmospheric pressure vessel.
2) Feed quantity: 550-1500L.
3) Upper homogenizer, the 5th generation micron level homogenizer.
4) Platform hanging ear fixed.
5) Homogeneous emulsification power 18.5KW speed 0-3500r/min. (The demander provides its own inverter and control system.)
6) Tank structure form: the upper and lower part of the tank is a three-layer structure, which is divided into the upper head, the tank body and the lower head. The upper head is connected to the tank body, and the tank body is connected to the lower head.
7) Tank inside and outside four layers of structure, divided into inner layer, sandwich heating and cooling layer, insulation layer, outer skin. It can be heated by running water or steam. The thermal insulation layer is insulated by aluminum silicate process. When heating, the temperature of the outer surface of the tank is less than 40℃.
8) Tank inner liner, upper and lower head material: SUS304, thickness: 10mm, jacket material: SUS304, thickness: 5mm, outer sheath material: SUS304, thickness: 2mm. The inner liner is hygienic mirror polishing 300MESH (hygienic), all welding joints in contact with the material are polished, Ra < 0.8μm, all concave and convex parts of the internal and external surfaces of the equipment are adopted arc transition (R≥10mm), or not less than 135 degrees chamfering transition, to ensure that there is no dead Angle easy to clean.
9) Tank cover with: Φ50 feed port, Φ38 purified water interface, 500mm diameter manhole 1 with cover can be sealed, Φ38 spare port, Φ25 compressed air inlet, Φ38 vacuum break port, Φ38 vacuum port. Integrated viewing mirror with light (DN80mm glass lens with tempered glass, brushed viewing mirror), pressure gauge, cleaning ball.