- Product Details
- {{item.text}}
Quick Details
-
Model Number:
-
T101
-
Warranty:
-
12 Years
-
Product name:
-
6 To 26 Tires Truck Tire Pressure Monitoring 433.92Mhz TPMS
-
Sensor lifespan:
-
more than 5 years
-
Tire Quantity:
-
6-18 pcs
-
Pressure range:
-
6-12 bar
-
High temperature:
-
85 Celsius Degree
-
Alarm:
-
label blinking, digital data and sound alarm
-
Sound alarm:
-
available to be turn off
-
Monitoring range:
-
Low pressure, high pressure, high temperature, leakage
-
Frequency:
-
433.92MHz
-
Display data cycle time:
-
6 seconds
Quick Details
-
Voltage:
-
24V
-
Place of Origin:
-
Guangdong, China
-
Brand Name:
-
QQr
-
Model Number:
-
T101
-
Warranty:
-
12 Years
-
Product name:
-
6 To 26 Tires Truck Tire Pressure Monitoring 433.92Mhz TPMS
-
Sensor lifespan:
-
more than 5 years
-
Tire Quantity:
-
6-18 pcs
-
Pressure range:
-
6-12 bar
-
High temperature:
-
85 Celsius Degree
-
Alarm:
-
label blinking, digital data and sound alarm
-
Sound alarm:
-
available to be turn off
-
Monitoring range:
-
Low pressure, high pressure, high temperature, leakage
-
Frequency:
-
433.92MHz
-
Display data cycle time:
-
6 seconds
6 To 26 Tires Truck Tire Pressure Monitoring Internal Digital 433.92 Mhz Truck Bus Tyre Monitor Pressure Sensor TPMS
- Real-time monitor the tires and alarm
- 6-26 tires
- Truck/bus/trailer supported
- No need to pay much attention to the display
- 6s to display the temperatue and tire pressure for each tire on the display
- Sensor ID Learn and Pair Available
- Sensor position Exchange Available
- Alarm threshold adjustment Available
- Temperature and Pressure unit change Available
Features
- Easy to install, Perfect match between embedded monitor and original car interior;
- Button sensitive, easy to operate and learn, set up and query integration;
- White, elegant backlight display data is clearly visible
- Supports up to 18 tires pressure / temperature monitoring simultaneously
- Tire cycle display, data information, alarm icon at a glance with 6 seconds, easy to observe;
- A variety of pressure / temperature unit selection
- Independently set the tire high pressure / low pressure / temperature alarm standard value
- Low pressure, high pressure, high temperature, leakage alarm functions integrated
- Sound, flashing and other alarm methods, suitable for commercial vehicles noisy environment.
Data Factory Default Setting
| Item | Setting |
| Unit | Bar |
| High pressure warning data | 12 Bar |
| Low pressure warning data | 6 Bar |
| Temperature unit | ℃ |
| High temperature warning data | 85 ℃ |
Product Technical Parameters
Receiver
| NO. | Item | Technical Parameters |
| 1 | Working Voltage | DC 12V~DC 32V |
| 2 | Working Current | < 10 mA |
| 3 | RF Signal Receiving Sensitivity | <-105 dbm |
| 4 | Working Temperature | -40℃ ~ 85℃ |
| 5 | RF Transmit Signal Modulation Method | FSK |
| 6 | Working Frequency | 433.92 Hz±30KHZ |
Repeater
| No. | Item | Technical Parameters |
| 1 | Working Voltage | DC 12V~DC 32V |
| 2 | Working Frequency | 433.92 MHz±30KHZ |
| 3 | RF Transmit Signal Modulation Method | FSK |
| 4 | RF Signal Transmission Power | < 10 dbm |
| 5 | RF Signal Receiving Sensitivity | <-105 dbm |
| 6 | Working Temperature | -40℃ ~ 85℃ |
Bandage Sensor
| No. | Item | Technical Parameters |
| 1 | Sensor battery model no. | CR2450(550mAh) |
| 2 | Quiescent Current | less than 0.7uA |
| 3 | Working Temperature | -40℃~125℃ |
| 4 | Storage Temperature | -40℃~125℃(store in normal temperature) |
| 5 | Transmission current | less than 10mA |
| 6 | Sensor battery lifespan | More than 5 years |
| 7 | RF Transmit Signal Modulation Method | FSK |
| 8 | Working Frequency | 433.92 MHz±30KHZ |
1.Real time data display recycle in 6 seconds
2.Bandage Sensor for easy installation
a. The sensor should be installed close to the valve, which will be more convenient for the receiver and sensor pairing and checking after the tire is installed.
b. After the sensor has been installed to check the sensor is loose, be sure to tighten the screws on the cable tie.
c. As a result of installation causes leakage, and thus cause failure, the Company does not assume joint responsibility and direct responsibility.
(3) RP Repeater Installation
a.The installation position of intelligent repeater should be in the position of the relatively empty. It can’t be lower than the cross beam of car chassis nearest to ground, but must close to the trailer tire(as picture below)
b.If there is no suitable trailer in the middle of the installation position can also choose to against the side of the trailer.
c.There must be no metal surface surrounded by three sides around the repeater.
