High temperature exhaust gasket material 45.2*5.5*60.7*27.2

High temperature exhaust gasket material 45.2*5.5*60.7*27.2

Product Description:

Product structure :

spiral wound gasekest,have 4 types:
SW - Basic Type
Basic construction type without solid outer and inner ring is reinforced with several plies of
metal with
filler to give greater stability and better compression characteristics. - Suitable for tongue and
groove, male
and female or grooved to flat face flange assemblies.
SWI - Inner Ring Type
Solid inner metal ring acts as a compression stopper. To prevent accumulation of solids, reduce
turbulent flow of process fluids and minimize erosion. The gasket is between flange bore and the
inside
diameter.The annular space is filled up by solid inner metal ring. - Suitable for male and female
pipe flanges .

SWC - Outer Ring Type
Solid outer ring accurately locates the gasket on the flange face to give the additional radial
strength to
prevent the gasket blowout and acts as a compression limiter. In case of installing the outer ring,
it is very easy
to install the gasket to flange face because the end of outer ring will touch at bolts - Suitable
for use with flat
face and raised face flanges.
SWCI - Inner & Outer Rings Type
An inner ring and outer ring type gasket will give an additional compression limiting stopper for
gasket inner
and outer side. It will prevent the corrosion on flange face at annular space. - Suitable for use
with flat face
and raised face flanges and specified for high pressure/temperature service - Class 900LB and above
or where
corrosive or toxic media are present.

Product specification:

1. Size: 8~3000mm
2. Pressure:
(1) Graphite Spiral Wound Gasket: ≤30.0Mpa
(2) PTFE Spiral Wound Gasket: ≤20.0Mpa
3. Temperature:
(1) Graphite Spiral
Wound Gasket: -250°C to 870 °C
(2) PTFE Spiral Wound Gasket: -200 °C to 260 °C
We provide two types of package as Brand Packing and Neutral Packing!We can also pack the goods as customers' demand

High temperature exhaust gasket material 45.2*5.5*60.7*27.2

Our product pictures:

high temperature resistance, oil resistance,hot air aging resistance,ozone resistance

good vacuum performance excellent physical and mechanical properties

good chemical corrosion resistance,good radiation resistance

OEM/ODM Service are available.Can design and produce various Non-standard Rubber Parts,

according to your requirement.

Models and logos can be customized according to your requirement
Designs and specification are accepted

Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.

we could offer the sample for free charge but do not pay the cost of freight.

If you have another question, pls feel free to contact us as below

Packaging & Shipping

High temperature exhaust gasket material 45.2*5.5*60.7*27.2